Installation Instructions Suction Line and Service Valve Assemblies
© 2005-2014, Cornelius Inc.
- 11 -
Publication Number: 630460289INS
27. At the back of the unit, place the new
evaporator extension (d) into the bottom
elbow fitting of the left evaporator
(FIGURE 20).
Feeding nitrogen into the suction side of
the evaporator, braze extension (d) into
place.
FIGURE 20
DO NOT braze new piping assemblies until all components have been placed in the unit.
28. Place the Heat Exchange Suction Line in the unit (FIGURE 21).
Connect the tubing to the right hand evaporator (a) (b), and condenser (c) (d).
FIGURE 21
d
a
b
d
c
