Cornelius NORDIC ELITE Series Owner'S Manual Download Page 7

Installation Guide and Owner’s Manual

© 2018, Cornelius Inc.

- 3 -

Publication Number: 548000033

F

REIGHT

 C

LAIMS

Inspect Promptly

This merchandise has been carefully inspected and packed in accordance with the carrier’s packing specifications. 
Responsibility for safe delivery has been assumed by the carrier. If loss or damage occurs, you as the consignee must 
file a claim with the carrier and hold the container for carrier’s inspection.

Visible Loss or Damage

Any external evidence of loss or damage must be fully described and noted on your freight bill or express receipt and 
signed by the carrier’s agent. The claim should be filed on a form available from the carrier.

Concealed Loss or Damage

If loss or damage does not appear until merchandise has been unpacked, make a written request for 
inspection by the carrier within 5 days of the delivery date, then file a claim on a form from the carrier.

FILE CLAIMS WITHOUT DELAY

DO NOT RETURN DAMAGED GOODS TO CORNELIUS.

How to use this Manual

Cornelius provides this manual as an aid to the service technician in installation and maintenance of the 

Nordic 

Series

 cube ice machines. Do not attempt to perform installation, start-up or maintenance unless you have read and 

fully understood this manual.

NOTE: Cornelius ice-makers and dispensers are not approved for outdoor installation

IMPORTANT: Air and water cooled ice machines are hermetically sealed and contain fluorinated greenhouse 

gas R404A (GWP 3922).

For a Service Provider, 

Please contact the Cornelius Service Department at 800-238-3600 or [email protected]

Keep this manual for future reference

The CNM Series Service Parts Manuals are available separately.

WARNING

!

Always disconnect electrical power and shut off water supply whenever maintenance or repairs are performed on the 
ice machine and related equipment.

CAUTION

!

Always wear protective eye wear whenever maintenance or repairs are performed on the ice machine and related 
equipment.

Cornelius Warranty

Every Cornelius ice maker is backed by a warranty that provides both parts and labor coverage. To view the warranty 
details, register products, or check your warranty status visit the “Warranty and Water Filter Registration” page on 
ice.cornelius.com

Summary of Contents for NORDIC ELITE Series



























Reviews: