Countertop Icemaker IMD Glacier Series Installation Manual
Publication Number: 620068501INS
- 10 -
© 2018, Cornelius Inc.
A
UGER
E
NGAGEMENT
Be certain that auger is fully engaged to lower drive and that extruding head is fully engaged to evaporator before
running the unit / assembling the components back.
8.
Assemble back the hopper / storage bin cover but do not put / tighten the screws yet.
9.
All the parts need to be assembled back only after finishing the drain connection set-up and initial start-up and
adjustment.
6.
Remove the storage bin cover by un-screwing
all the four screw as shown in Figure 9.
NOTE: Dis-engage the motor harness
before lifting up the top lid of bin.
7.
Remove the cardboard / shipping insert from
the hopper as shown in the Figure 9A.
Figure 9
Figure 9A.
Summary of Contents for IMD GLACIER 500-30
Page 39: ......
