Cornelius FCB 3 H.P. POST-MIX DISPENSER, Installation & Service Manual, Page: 9 / 78

2
312026000
CAUTION: Before shipping, storing, or relocating Unit, syrup systems must be sanitized
and all sanitizing solution must be purged from syrup systems. All water must also be
purged from plain and carbonated water systems. A freezing ambient environment will
cause residual sanitizing solution or water remaining inside Unit to freeze resulting in damage to
internal components.
Table 1. Design Data
Unit Part Number:
Two-Flavor 3 H.P. (Air--Cooled) 4166200000
Two-Flavor 3 H.P. (Water-Cooled) 4166220000
Overall Dimensions:
Height
Width
Depth (W/O Drip Tray)
Depth W/Drip Tray 60-1/2 inches
19-1/4 inches
32-1/2 inches
38 inches
Shipping Weight (approx) 466 pounds
Compressor Horsepower 3 H.P.
Refrigeration System:
Refrigerant Type and Charge See Unit
Nameplate
Ambient Operating Temp. 40
°
F to 100
°
F
Electrical Requirements:
Operating Voltage See Unit Nameplate
Current Draw See Unit Nameplate
REFRIGERATION SYSTEMS
NOTE: The FCB Dispenser (depending upon the model number) refrigeration system is either
“air-cooled” or “water-cooled”.
“AIR-COOLED”
The “air-cooled” FCB Dispenser refrigeration system is equipped with a condenser coil that is cooled by a
condenser coil fan.
“WATER-COOLED”
The “water-cooled” Two-Flavor FCB Dispenser refrigeration system is equipped with a Refrigeration Cooling Coil
Assembly that contains both refrigerant and plain water cooling coils. Circulating cool plain water through the
cooling coil cools the refrigerant also inside the coil. During installation, City cold plain water is connected to the
FCB Dispenser Refrigeration Cooling Coil water inlet line labeled “COOLING WATER IN”. The water drain line
labeled “COOLING WATER OUT” must be routed to and be connected to a permanent drain.