
I
nstallation/Service
Manual
IMPORTANT:
TO THE INSTALLER.
It is the responsibility of the Installer
to ensure that the water supply to the
dispensing equipment is provided
with protection against backflow by
an air gap as defined in ANSI/ASME
A112. 1.2-1979; or an approved
vacuum breaker or other such
method as proved effective by test.
Water pipe connections and fixtures
directly connected to a potable water
supply shall be sized, installed, and
maintained according to Federal,
State, and Local laws.
FCB 3 H.P. POST-MIX DISPENSER
TWO-FLAVOR W/HOT-GAS DEFROST
AND V3+ FEATURES
PRINTED IN U.S.A
IMI CORNELIUS INC; 1995–98
IMI CORNELIUS INC
g
One Cornelius Place
g
Anoka, MN 55303-6234
Telephone (800) 238-3600 Facsimile (612) 422-3246
Part No. 312026000
March 14, 1995
Revised: February 3, 1998
Control Code A–B–C
THIS DOCUMENT CONTAINS IMPORTANT INFORMATION
This Manual must be read and understood before installing or operating this equipment
Summary of Contents for FCB 3 H.P. POST-MIX DISPENSER
Page 23: ...16 312026000 THIS PAGE LEFT BLANK INTENTIONALLY...
Page 69: ......
Page 70: ...62 312026000 FIGURE 17 WIRING DIAGRAM 3584 Rev C...