![Cornelius Enduro-200 Installation Manual Download Page 3](http://html1.mh-extra.com/html/cornelius/enduro-200/enduro-200_installation-manual_2667817003.webp)
1
92181INS
SAFETY PRECAUTIONS
Always:
Disconnect power to the dispenser before servicing or cleaning.
Never
: Place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rotation oc-
curs automatically when dispenser is energized!
This ice dispenser has been specifically designed to provide protection against personal injury and eliminates
contamination of ice.To insure continued protection and sanitation, observe the following:
ALWAYS:
Be sure the removable lid is properly installed to prevent unauthorized access to the hopper interior and
possible contamination of the ice.
ALWAYS:
Be sure the upper and lower front panels are securely fastened.
ALWAYS:
Keep area around the dispenser clean of ice cubes.
This appliance is not intended for use by young children or infirm persons unless they have been adequately su-
pervised by a responsible person to ensure that they can use the appliance safely. Young children should be su-
pervised to ensure that they do not play with the appliance.
CAUTION:
Dispenser cannot be used with crushed or flaked ice.
Use of bagged ice which has frozen into large chunks can void warranty. The
dispenser agitator is not designed to be an ice crusher. Use of large chunks of
ice which ”jam up” inside the hopper will cause failure of the agitator motor and
damage to the hopper. If bagged ice is used, it must be carefully and completely
broken into small, cube--sized pieces before filling into the dispenser hopper.
DESCRIPTION
The “ENDURO” series of ice dispensers solves your ice and beverage service needs in a sanitary, space saving, eco-
nomical way. Designed to be manually filled with ice from any remote ice making source, these dispensers will dis-
pense cubes (up to 1-1/4 in. in size), cubelets, and hard-chipped or cracked ice; and in addition, several flavors of
post--mix beverages. The “BC” units include beverage faucets and a cold plate and are designed to be supplied direct
from syrup tanks and a carbonator, with no additional cooling required.
SPECIFICATIONS
Model
ED200 (ice only)
ED250 (ice only)
B (Beverage Faucets)
B (Beverage Faucets)
C (Cold Plate)
C (Cold Plate)
Z (No drip tray)
Z (No drip tray)
N (No Lid)
N (No Lid)
F (Flavor)
F (Flavor)
H (Internal Carb)
H (Internal Carb)
Ice storage
200 pounds
250 pounds
Maximum No. of
Beverage Faucets
Available
10
10
Cold Plate (Built--In)
Yes, On BC Model Only
Yes, On BC Model Only
Electrical
120/1/60, 3.5 Amps
220--240/1/50--60, 2.0 Amps
120/1/60, 3.5 Amps
220--240/1/50--60, 2.0 Amps
Dimensions
30 in. Wide X 30-11/16 in. Deep X 35-5/8
in. High
30 in. Wide X 30-11/16 in. Deep X 39-5/8
in. High
Z Model
30 in. Wide X 23-1/16 in. Deep X 35-5/8
in. High
30 in. Wide X 23-1/16 in. Deep X 39-5/8
in. High