OPTIONAL LIGHTING
12
Connect the two wires together.
Place the battery case in the top seat cavity, the smallest part to-
wards the inside of the pool.
Bend the wire into the space behind the battery case and lower the
sensor over it.
Hold everything in place using the plastic frame by placing the thin
part towards the inside of the pool.
SECURITY LABELS INSTALLATION
13
FRAME
(THIN SIDE)
SENSOR
BATTERY
CASE
WIRE
FILTRATION SYSTEM ASSEMBLY
14
Assemble skimmer, inlet, drain, filter, pumps, hoses according to separate
manufacturer’s instructions.
Note: See 'Safety Information" Manual.
Install the four (4) safety labels (DANGER) supplied with your pool
as follows: two (2) labels visible at the entrance to the pool and two
(2) visible at the main access of the backyard.
Important:
if you require additional labels, please contact us at Cor-
neliuspools.com
Install a minimum of three (3) safety labels (supplied with the liner)
inside the pool so that at least one label is visible no matter where
the bather enters the water (see drawing for positionning)
LABEL
