Replacing GIB Controller on Quest Juice Dispensers
Publication Number: 729011138INS
- 2 -
© 2003-2011, IMI Cornelius Inc.
Removal of GIB Control
1.
Disconnect power from unit.
2.
Remove dispensing nozzles.
3.
To remove splash panel located at the bottom of the unit
remove two screws left and right side and slide splash panel
forward.
4.
To remove top panel open door and locate two screws at
the rear of the panel. Slide top panel forward to release it
from the front.
5.
To remove the side panels locate two screws at the rear of
the panel top and bottom and pull off.
6.
Locate the plastic wire tie holding the wire harness bundle
together and cut to remove.