Repairs
Cornelius Deutschland GmbH
Document no. TD0004100
Version 01/07/2019, Index 1
Installation and service manual Tower
Nueva Style
19
7.4
Replacing the display
17. Position the mounting brackets (Fig. 33/1) on the taxi cab hood.
18. Attach the taxi cab hood (Fig. 28/2) using the fastening bolts (Fig. 28/1).
19. Connect the electrical cables to the voltage transformer (Fig. 27/3).
20. Position the front panel (Fig. 27/4) with taxi cab hood (Fig. 27/1) on the rear panel (Fig. 27/2).
21. Attach the front panel (Fig. 26/2) using the fastening bolts (Fig. 26/1).
Fig. 33
1
1
Prerequisites
References
The unit has been disconnected from the power supply.
see chapter 4.1
Spare parts
ID/reference
Qty/amount
Comment
Display
220116341
1
Retaining plate
220116283
1
Adapter piece
220116282
1
1. Remove the fastening bolts (Fig. 34/1) of the front panel (Fig. 34/2).
Fig. 34
1
2
1
1
1
1
2. Disconnect the electrical cables (Fig. 35/3).
3. Lift and remove the front panel (Fig. 35/5) with taxi cab hood (Fig. 35/1) from the rear panel
(Fig. 35/2) in a forward motion.
4. Disconnect the electrical cables (cable no. 220046597) on the voltage transformer (Fig. 35/4).
Fig. 35
2
5
4
1
3
5. Disconnect the electrical cables (Fig. 36/1 and 5) on the display.
6. Remove the fastening bolts (Fig. 36/2) from the retaining plate (Fig. 36/3).
7. Remove the retaining plate (Fig. 37/3) with display from the taxi cab hood (Fig. 37/4)
Fig. 36
1
2
3
2
4
2
2
5
