OPTIONAL LIGHTING
15
Connect the two wires together.
Place the battery case in the top seat cavity, the smallest part to-
wards the inside of the pool.
Bend the wire into the space behind the battery case and lower the
sensor over it.
Hold everything in place using the plastic frame by placing the thin
part towards the inside of the pool.
Position the safety procedures panel on the outside of the pool. This
panel must be at the most visible place from the yard on your pool.
Place the three (3) safety stickers inside the pool in a way that it’s
seen from any entry point of the swimmer (See positionning draw-
ing).
SECURITY SIGNS INSTALLATION
16
FRAME
(THIN SIDE)
SENSOR
BATTERY
CASE
WIRE
