cormidi C85 Series, Manual

Page: 9 / 60

9
1.5.2 Blocking the Arm
fig. 3 – blocking the arm
If necessary, the machine is equipped with a device used to block the down-
loading arm in the raised position and prevents accidental lowering, as needed
can be placed on the piston on the left or right in a similar manner.
Follow these steps (
see fig. 3 ):
•
Raise your arm of self-loading;
•
Lift the body;
•
Turn off the engine;
•
Remove the safety device "B", on the left side of the skip, ;
•
remove it by unscrewing the knob
•
Insert the slots "A" of the bar close to the hydraulic cylinder;
•
Turn the bar is parallel to the cylinder;
•
Insert the pin "C"
•
Pull down slowly with the engine off the skip until the interlocking device
After the operations, remove the device and place it back into place.
AC-ACW HIAC-HIACW