Corghi DV 120, Operator'S Manual

Page: 20 / 60

20
DV 120
operator’s manual
MAINTENANCE
WARNING
CORGHI declines all liability for claims deriving from the use of non-original spares
or accessories.
WARNING
Before making any adjustments or performing maintenance work, set the DV 120 in
the configuration shown in fig. 2 (rest position), disconnect the compressed air supply
from the machine and make sure that all moving parts are suitably immobilised.
WARNING
Do not remove or modify any parts of this machine (except for service procedures).
WARNING
Before removing pneumatic system fittings or pipelines check that they do not contain
pressurised fluids. Air escaping under pressure may cause serious injuries.
WARNING
Before carrying out any maintenance operation, remember to disconnect the com-
pressed air supply.
SCRAPPING
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal com-
ponents and dispose of them separately, as provided for by local legislation.
ENVIRONMENTAL INFORMATION
Following disposal procedure shall be exclusively applied to the machines having the
crossed-out bin symbol on their data plate .
This product may contain substances that can be hazardous to the environment or to
human health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these
substances and to improve the use of natural resources.
Electrical and electronic equipments should never be disposed of in the usual municipal
waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and in this page, remind you of the
need to dispose of properly the product at the end of its life.