Coretec VCX-2400-D, Installation And Operating Instructions Manual

Page: 6 / 47

Display
The fluorescent LED display provides a scrolling list of key parameters when the unit is in its active (non-
stand-by) state.
The display is a two-line display. Each parameter is displayed, in turn, for three seconds on the
bottom line. It then moves to the top line while the next parameter is displayed on the bottom line.
The parameters displayed are as follows:

Name of unit

Software version

Device IP address

Sub-net mask

Video IP (multi-cast group)

Maximum Bit Rate (encoder only)

Audio On or Off

Com 1 On or Off

Com 1 Bit Rate

Com 1 IP

Com 2 On or Off

Com 2 Bit Rate

Com 2 IP
Mounting the Encoder
The VCX-2400-E Encoder and VCX-2400-D Decoder mount in an identical fashion. The 1RU
high units are furnished with mounting ears allowing installation in a 19” rack frame.
All signal connections are from the rear, eliminating any need for setback from the front plane of
the rack. The user programming port on the front panel is used to alter system parameters via Hyper
Terminal.
A circulation fan is located on the side of the unit .