Coretec VCX-2400-D, Installation And Operating Instructions Manual

Page: 28 / 47

4) Core Tec Watchdog Software
Please refer to the Watchdog Manuals.
Program Commands
IMPORTANT NOTES:
1. After entering one or more commands, it is necessary to enter COMMIT and REBOOT for
the new settings to take effect.
2. Typing “?” displays a listing of all commands.
Network Setup
IP (IP Address)
The IP address setup is in the form of decimal dotted notation. The selection of an IP should
come from the person who administrates the network. The current IP selection is static. A dynamic IP
setting using DHCP is planned for future enhancement.
Default:
Encoder - 192.168.0.253
Decoder - 192.168.0.254
Example command: IP 192.168.0.10 (sets IP address to 192.168.0.10)
IPMASK (IP Subnet Mask)
The IP Subnet Mask is in the form of decimal dotted notation. The selection of an IP subnet
mask should come from the network administrator. It is used to represent the number of bits in the
current IP subnet.
Default:
255.255.255.0
Example command: IPMASK 255.255.255.128
GATEWAY
The GATEWAY command can have either one or three parameters. The first parameter is the IP
address of the host that is the gateway. Optionally you may include the IP address and the subnet mask of
the subnet you want to route through the gateway. You can program up to five gateway entries.
Default: No Gateways
Example command: GATEWAY 192.168.0.1