Coretec Trainer 1000 SE User Manual Download Page 5

 
 

PAGE 5 OF 10 

 

 

PHONE: +49-6403-60984-0 

FAX: +49-6403-60984-44 

 

 

E-MAIL: [email protected] 

HOMEPAGE: WWW.TRAINER1000.COM 

turn off the AED Trainer. Press button again. 

pacemaker. 

VF

VT HF 180

TdP

 

This button is not active. It is only used on 
Trainers with ECG mode. 

In ECG mode, this button will bring up ventricular 
fibrillation, ventricular tachycardia with a heart 
rate of 180/minute or torsade de pointes on the 
display.  

 

No function 

Pressing this button before selecting a rhythm 
ensures that the rhythm will only be changed 
after defibrillation. (Only in manual mode) 

Bigemin.

AVB 3:1

AF

 

Press at any time to stop any of the Trainer 
1000’s functions. Press again to make the 
Trainer 1000 continue its operation from the 
point it was previously stopped at. Press Fl , F2, 
F3, F4, F5 or C1 for changing the shock protocol  
while the Trainer 1000 is set to PAUSE. Press 
PAUSE again to verify the change and to turn 
off the AED Trainer. 

Pressing this button will bring up a bigeminus, a 
3:1 AV block or atrail fibrillation on the display. 

 

To change to ECG mode 

Pressing this button will make the Trainer 1000 
only use the signals from the connected lead for 
monitoring. 
Pressing this button will make the device switch 
to ECG mode 

 

No function 

Pressing this button will enable you to activate 
the heart rhythms shown in red. To do so, press 
this button first and then the required rhythm 
button. 

 

No function 

Pressing this button will enable you to activate 
the heart rhythms shown in green. To do so, 
press this button first and then the required 
rhythm button. 

HI inf

Digitalis

VT HF 110

 

Pressing this button once will active the warning 
LOW BATTERY. Press again to deactivate 
warning. 

Pressing this button will bring up an ST-elevation 
or a non-ST myocardial infraction rhythm.  It can 
also be used to simulate a VT with a heart rate of 
approx. 120/minute. 

AVB 3°

Agonal

Asystol

 

No function 

This button will bring up a third degree AV block, 
an agonal rhythm (electro-mechanical 
dissociation) or an asystole.  

 
 
 
 
 

Summary of Contents for Trainer 1000 SE











Reviews: