3
In order to prevent damage to the product caused by improper operation, please
pay attention to following points when using:
N31 piezo motor is used as much as possible in dust-free, oil-free, lubricant-free
environments;
Since the product adopts flexible structure design, it is recommended that the load
not exceed the bearing capacity of the product. Pay attention to the torque when
loading. Do not twist or twist the load surface to avoid damage to the structure;
Do not disassemble the product to avoid product damage;
Avoid stretching and bending the cable interface to prevent damage to the cable;
Please use the dedicated cable provided by us to connect the piezo motor and piezo
controller;
Please do not use cable extension wire, if need longer cable, please contact us.
Temperature changed and pressure will charge the piezo motor. Piezo motor
will remain charged for a period of time disconnected from the controller, so the
operator should pay attention when using it:
Do not disassemble N31 piezo motor;
Discharge N31 piezo motor before installation, it could be achieved by connecting
to the controller;
Do not pull out the controller during operation;
Before using, please check whether the connecting wire of the product is in good
condition, whether the product and the controller are effectively protected from
grounding, in case of danger, please strictly regulate the operation during operation,
do not touch it (up to 150V voltage) after power on.
2. Safety Guide
N31 linear piezo motor is designed with advanced technology and safety standards,
for
safety and proper use of the product, please pay attention to following points when using:
