6
E51.B3S Series Piezo Controller User Manual
6.Notes and suggestions
E51.B3S cannot be used to drive inductive loads. If the inductive loads are driven, the
product may be damaged.
When the power is high (the sum of the average current of the drive output is greater
than 40mA), please pay attention to heat dissipation so that the temperature of the shell is kept
below 65℃ .
7.1 Cleaning measures
Note! The PCB board of the function module in the E51
.B3S
system is an ESD (electrostatic
discharge) sensitive device. Take precautions against any static build-up of these devices before
use to avoid contact with circuit component leads and PCB wiring. Before touching any electronic
components, the body first touches the grounding conductor to discharge static electricity, ensuring
that any type of conductive particles (metal, dust or debris, pencil lead, screws) enter the device.
Be careful not to drop the equipment when cleaning, to avoid any form of mechanical shock!
Disconnect the power plug of the E51
.B3S
system before cleaning.
Prevent cleaning fluid and any liquid from entering the system module to avoid short
circuits.
The surface of the system chassis and the front panel of the module, please do not use an
organic solvent for surface wiping.
7.2 Transportation and Storage
This product is packed in carton. Transportation must be carried out under product
packaging conditions, and direct rain and snow, direct contact with corrosive gases and strong
vibrations should be avoided during transportation.
The instrument can be transported under various conditions of normal transportation, and
should avoid damp, load, collision, extrusion, irregular placement and other adverse conditions
during transportation.
7. Maintenance, Storage, Transportation
