Corega DSLAAU, User Manual

Page: 49 / 62

47
DSLAAU Manual
47
• To add a new gateway, type the address in the New gateway field
and click <Add>. The new gateway will appear in the Installed
gateways list.
• To remove a previously installed gateway, highlight the entry to
be removed in the Installed gateways list and click <Remove>.
The gateway will no longer appear in the Installed gateways list.
5. Click <OK> to apply your changes and exit from the “TCP/IP
Properties” window.
6. The “Network” window will reappear. Click <OK> to end the TCP/IP
options modification session.
7. If you have made changes to TCP/IP properties, you will be asked to
restart/reboot your PC. Click <Yes>, and your PC will restart.
MAC OS 9.x
If you have not done so yet, connect corega DSLAAU to the computer
using the proper USB device cable. Connect the DSL line to corega
DSLAAU, too.
TCP/IP settings are set up automatically during the software installa-
tion process. The following procedure may be used to change TCP/IP
settings, if necessary.
1. Click on the Apple icon (
), and then select Control Panels =>
TCP/IP.
2. The “TCP/IP” window will appear.