9
CHARGING THE POWER CELL
– cont’d
3. When the Power Cell is inserted
into the charger, the red LED (5)
will remain ON and the second
LED (6) will turn to orange,
indicating that the Power Cell is
being charged.
4. When the Power Cell is fully
charged, the upper LED (5) will
remain red and the lower LED (6)
will change to green.
5. When the Power Cell is fully
charged, remove it from the
charger and unplug the charger
from the power source.
NOTES:
a) Lithium-Ion Power Cells will continue
to provide nearly full power with minimal
power fade unlike traditional batteries;
when the Power Cell is fully discharged,
the Power Cell electronic control
circuitry will immediately cut power
output to the tool without notice. A
discharged Power Cell should be
promptly recharged to maintain its
operational voltage potential and to be
ready for future use.
b) Do NOT charge the Power Cell when
the work area or the Power Cell
temperature is at or below 32° F (0°C)
or above 113° F (45°C). The optimal
temperature is 68° F (20°C).
c) Remove the Power Cell from the
charger and unplug the charger once
the Power Cell has been completely
charged.
ASSEMBLY AND OPERATING
Fig. 1
