COUGAR 12Z
23A
1.
DMX LED should be on. If not, check DMX connectors, cables to see if link
properly.
2.
If the DMX LED is on and no response to the channel, check the address settings
and DMX polarity.
3.
If you have intermittent DMX signal problems, check the pins on connectors or
on PCB of the unit or the previous one.
4.
Try to use another DMX controller.
5.
Check if the DMX cables run near or run alongside to high voltage cables that
may cause damage or interference to DMX interface circuit.
C. Some units don’t respond to the easy controller
1.
You may have a break in the DMX cabling. Check the LED for the response of the
master/ slave mode signal.
2.
Wrong DMX address in the unit. Set the proper address.
6. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried
out periodically to optimize light output. Cleaning frequency depends on the
environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s optics.
Summary of Contents for COUGAR 12Z
Page 1: ...COUGAR 12Z User Manual Please read the instruction carefully before using...
Page 2: ...COUGAR 12Z 1A...
Page 10: ...COUGAR 12Z 9A...
Page 26: ...COUGAR 12Z 25A...
