Core ColourPoint, User Manual

Page: 14 / 20

ColourPoint User Manual V1_2 12
Pairing with a W-DMX Transmitter unit

Switch on the ColourPoint.

Ensure the ColourPoint is unpaired from any other transmitter (the LINK LED is OFF)
– above.

Ensure the transmitter is within range and switched on. Press its
‘FUNCTION’ button for more
than 1s.

The transmitter will scan for all unlinked receivers for around 10 seconds; the LED will flash.

If pairing is successful the LINK LED on the ColourPoint will illuminate.

ALL Unlinked ColourPoint units (and other Unlinked W-DMX units too) may be linked at the
same time. No apparent limit to the number being paired.

For receiver units not to be paired with this transmitter, simply switch off those unwanted
receivers before this pairing process. They may be paired with a different transmitter after
switching on again and repeating the pairing process with the new transmitter.
Pairing with a CORE Point15, Point20 or Point30 Master unit

Switch on the ColourPoint.

Ensure the ColourPoint is unpaired from any other transmitter (the LINK LED is OFF)
– above.

Ensure the Master unit is within range and switched on.

Select MODE MSTR

MSTR DMX

Add Unit
 ‘+’ to select ‘YES’ 
to confirm.

The transmitter will scan for all unlinked receivers for around 10 seconds; the LINK LEDs flash.

If pairing is successful the LINK LED on the ColourPoint will illuminate.

ALL Unlinked ColourPoint units (and other Unlinked W-DMX units too) may be linked at the
same time. No apparent limit to the number being paired.

For receiver units not to be paired with this transmitter, simply switch off those unwanted
receivers before this pairing process. They may be paired with a different transmitter after
switching on again and repeating the pairing process with the new transmitter.
For successful linking the receiver must fulfill the following conditions:
Distance to transmitter (in free air)

Less than 200m for Micro model transmitter

Less than 500m for BlackBox or WhiteBox transmitter
Position above obstacles (e.g. crowds and tress)

Minimum 1m
i
Pairing to a transmitter is remembered after power off or the battery is depleted.
This allows the system pairing to be set up in a warehouse and the whole system simply switched on at
the site, which makes deployment very simple.