
ColourPoint User Manual V1_2
11
W-DMX Pairing and Unpairing
ColourPoint units need to be manually paired with the lighting control unit equipped with a W-DMX
transmitter. This could be a lighting desk with DMX Output, or a CORE Point15/20/30 Master unit with a
W-DMX transmitter inside.
This allows a group of ColourPoint fixtures to be controlled from the lighting desk or Point15/20/30
Master using the built-in colour cycles (Inside Point15/20/30). Or set up individually selected colours
across many units at once from just one Master unit.
W-DMX Link LED
The W-DMX link status is shown by the LINK LED, this provides information on the W-DMX link. This
follows the same status indication as all Wireless Solution W-DMX products.
OFF
If the LED is OFF the ColourPoint is
not paired
with a W-DMX transmitter
FLASHING
If the LED is FLASHING the ColourPoint is
paired
with a W-DMX
transmitter, but the
transmitter is switched off
.
STEADY ON
If the LED is STEADILY ILLUMINATED the ColourPoint is paired with, and ready
to receive data from a W-DMX transmitter. This is a
fully paired
and
fully
functioning
system.
UNEVEN
FLASHING
If the LED is FLASHING unevenly, the ColourPoint could be
paired
with
a W-DMX transmitter, the
transmitter is switched on, but no DMX
Input to the transmitter
.
Alternatively, it could mean a fault condition on the W-DMX card inside
the ColourPoint.
See *(1) for rectification below
.
*(1)
– If uneven flashing of the WDMX LED occurs as a result of a fault condition (and not because
the transmitter has no DMX signal input) then the internal WDMX card needs to be reset.
a) Turn off the unit.
b) Simply hold down the WDMX button whilst switching ON the power button.
c) Release the WDMX button after a second and the WDMX internal card should be reset. The
WDMX LED should now be extinguished.
Unpairing from all W-DMX Transmitter units
Switch on the ColourPoint.
Press and hold the
button until the W-DMX LINK LED is turned OFF.
ColourPoint is now
unpaired
from the W-DMX transmitter.
Summary of Contents for ColourPoint
Page 1: ...USER MANUAL Battery Wireless Up light Lithium...
Page 2: ......