Page 4
6.
Use a 4mm allen key to lock the mast assembly to
the frame using one (1) piece of the M8 x 40mm
set screw (740-4593).
7.
Use a #2 phillips screwdriver to secure the back
console shroud to the console weldment using
eight (8) pieces of the #8-18 x 3/4” screw (110-
3402) and M4 washer (120-3307).
8.
Install the console grommet onto the mast (020-
7522).
9.
Refer to the documentation contained inside the
console box in order to connect the console to
the unit.
NOTE:
Depending on which console was purchased,
the install instructions could diff er.
10.
Use a #2 phillips screwdriver to secure the
console front (701-0317-XX) to the back shroud
using eight (6) pieces of the #8-18 x 3/4” screw.
