Page 33
BEFORE EACH RIDE
PAIRING HEART RATE AND APPS, SETTING PERSONAL FTP AND MAX HR
The console will automatically scan for a HR monitor for the first 30 seconds of waking up (illustrated by a
flashing heart icon in the message center) or until paired by tapping a compatible NFC device to the
icon.
While in ACTIVE mode, the Personalization button is used to change pairing options, HR settings, and FTP
settings.
1.
Tap the
button once to personalize FTP.
• Default FTP value is shown in the message center (change in MAINTENANCE mode)
• Press the
buttons to increase or decrease value by 1 or hold to increase or decrease by 5
every 0.5 seconds.
• Press the
button to save the value shown in the message center. If not pressed, the
console will return to ACTIVE without saving the value after 5 seconds.
2.
Tap the
button twice to personalize Max Heart Rate
• Default MAX HR value is shown in the message center (change in MAINTENANCE mode)
• Press the
buttons to increase or decrease value by 1 or hold to increase or decrease by 5
every 0.5 seconds.
• Press the
button to save the value shown in the message center. If not pressed, the
console will return to ACTIVE without saving the value after 5 seconds.
3.
Tap the
button three times to enable HR or App Pairing, then use the
buttons to select the
desired action.
• If HR Pair is selected, the message center displays the closest 8 ANT+ or BLE monitor, the
closest one displaying first. Use the
buttons to select the desired HR ID for pairing.
• If App Pair is selected, the console ID is displayed on the message center to manually select
on the phone app.
• For either option, if no buttons are pressed the console will return to ACTIVE mode after 5
seconds.
Note:
Pair will not be available if a watch has already been connected.
4.
Tap the
button again to return to the ACTIVE screen. FTP and Max HR will return to the defaults set
in MAINTENANCE mode after the ride completes.
