![Core Health & Fitness 9-7470 Owner'S Manual Download Page 31](http://html.mh-extra.com/html/core-health-and-fitness/9-7470/9-7470_owners-manual_2666990031.webp)
Page 30
Description
Function
ZONE METER
The zone meter displays one of four ways:
Reduced Mode
Cadence
Shown at 73RPM
%FTP
%HR
Tap the
button in ACTIVE mode to toggle between active display.
By default the zone meter shows cadence.
AVG/MAX
Button
In ACTIVE mode used to display average and maximum values of ride metrics.
In MAINTENANCE mode used to scroll forward through menus or increase a value.
Personalization
Button
Allows Custom values to be set for FTP and Max HR
Allows Pairing of HR Strap and/or App
UP/DOWN
Buttons
Allows for selection of message center options on various screens
Data Link
tap-to-pair
Apple
1
and Samsung watches (NFC only, not other HR monitors or
apps). You may need to set your watch to Detect Gym Equipment, and accept the
connection to start a workout. When a compatible device is linked, the
will
illuminate if the device is ANT+ or will illuminate for a Bluetooth connection.
When connected to Apple Watch, Calories displayed on the console will alternate
between Total and Active.
To connect:
Hold the watch near the
icon on the console (this is where
the NFC reader is located). When the display and watch detect each other, the
Bluetooth button on the display will flash and then turn solid blue, and watch will
ask user to confirm connection with the display. Once connection is confirmed by
user, it will finalize and data will begin to pass between console and watch. It is
possible to make this connection at any time during an active workout. At the end
of workout, the connection will be terminated.
Note:
when Apple Watch is connected to display, the Calories display window will
show both Active and Total Calories per Apple Watch calculations.
FTP Trophies
Fields show rolling best power outputs performed by the rider in 1 minute, 5
minute, and 20 minute increments. Except for the first recorded value, when a rider
reaches 90% of the previous best value the time name will blink.
Once a new best is achieved the trophy icon blinks for 5 seconds before setting the
new value.
Does not illuminate in
reduced mode
.
1
Apple’s GymKit is designed for Watches running WatchOS 4.1 or newer.