1
The KP7 mounts in a 1 gang (US) box. It is suggested that it be placed
near light switches to reduce wall clutter. The KP7 trims with a standard
decorator-style opening wall plate (not included).
The KP7 requires a mounting depth of at least 1 ¾” (4.5cm) and it is recommended that
a 20cu in or larger switch box or a 1 gang low voltage bracket be used. The KP7 will gang
with other low voltage devices utilizing a standard decorator-style trim plate.
The KP7 requires connection to a PoE, Power over Ethernet, switch or to an Ethernet cable
connected to a PoE injector. The KP7 cannot be locally powered.
KP7 – Overview
Planning the installation
Bezel
retention screws
Bezel
Front
Back
Buttons
6 & 7
Buttons
1 - 5
KP7
MAC ID
F-1-A
Network Switch
PoE Injector
TP7
Touch Panel
F-1-B
KP7
PoE Network Switch
Favorite 1
Favorite 2
Favorite 3
Off
Favorite 4
V
V
LAN/PoE Input
PoE requirements
fromspecifications
Power
Requirements
PoE IEEE 802.3af,
13 W maximum draw
(@44V /350mA max)
