9
Electrical Safety
1.
Plug the appliance in a grounded socket protected by
a fuse conforming to the values specified in the technical
specifications chart.
2.
Have an authorized electrician set grounding equipment.
Our company shall not be responsible for the damages
that shall be incurred due to using the product without
grounding according to local regulations.
3.
The circuit breaker switches of the oven shall be
placed so that end user can reach them when the oven
is installed.
4.
The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
5.
If the power supply cord (the cord with plug) is
damaged, this cord shall be replaced by the manufacturer
or its service agent or an equally qualified personnel to
prevent a hazardous situation.
6.
Never wash the appliance by spraying or pouring
water on it. There is a risk of electrocution.
7. WARNING: To avoid electric shock, ensure that the
device circuit is open before changing the lamp.
8. WARNING: Cut off all supply circuit connections before
accessing the terminals.
9.
Do not use cut or damaged cords or extension cords
other than the original cord.
10.
Make sure that there is no liquid or humidity in
the outlet where the product plug is installed.
Summary of Contents for CCHC SF 45 MEC
