2
=
=
=
100mm
max
100mm
max
ø 4.5
mm
PN10676
PN10676
a:
Drill holes in both wall channels (PN10676) at points shown using a 4.5mm drill bit, through the middle and in the groove.
b:
Ensure the shower tray is level in all directions.
IMPORTANT:
Clean the tray and seal the gap between the tray surface and tiles. It is important that the tray is sealed right up to
the tray edge so that the bottom of the wall channel is sealed. Failure to do this will cause water to leak under the wall channel
and between the tray and tiles, resulting in damp patches on the wall and under the tray.
1
a
b
Check contents of pack before installation. If anything is
missing, contact our Customer Careline for assistance.
CUSTOMER CARELINE: 01746 713410
8
PN3230
24
PN3225
4
6
14
PN4748
4
2
4
PN50489
PN60517
PN50488
PN50486
PN50487
PN60524
2
2
2
2
2
1/1
4
PN60518
760 RAIL - PN11154
800 RAIL - PN11155
760 RAIL - PN11156
800 RAIL - PN11157
760 RAIL - PN11154
800 RAIL - PN11155
760 RAIL - PN11156
800 RAIL - PN11157
10mm
32mm
2/2
PN60511
PN60521
Bottom
wheels
PN40333
PN40260
PN40095
PN80564
Top
wheels
9mm
Flipper
12mm
Flipper
