7 8
3
4
Assembly Chart 1240/1204
shelves
Carefully screw the insert nut (
part 8
)
straight
into the hole provided in the shelf (
part 2
)
using a cordless screwdriver with an Allen bit.
Insert 4 connector housings (
part 9
) into the
holes provided in the shelf (
part 2
) and 3
connector housings (
part 9
) into the 2 shelves
(
part 3
). Make sure that the side holes in the
housings are aligned with the side drill holes.
TIP: Check the correct position with the help
of a shelf bolt by inserting it into the side hole
for testing and then pulling it out again.
Insert a Maxifix bolt (
part 6
) into the shelf
(
part 2
) with a Phillips screwdriver into the
insert nuts (
part 10
) provided for this purpose.
GB
