manualshive.com logo in svg

CopperOptics 150-1318-02, Manual

Share
Download
CopperOptics 150-1318-02 Manual Download Page 4

Section 363-718-102

May 30, 1997

Revision 01

Page 2

PairGain Engineering - Plant Series

PG-Flex FCS-718

2.  Specifications

Electrical Characteristics

Power .......................................................................... -48 Vdc CO battery

Environmental

Operating Temperature ................................................ -40° F to +150° F (-40° C to + 65° C)

Operating Humidity ..................................................... 5% to 95% (non-condensing)

Operating Elevation ..................................................... -200 feet to 13,000 feet (-60 m to 4,000 m)

Physical

Mounting ..................................................................... 19- or 23-inch equipment bay using universal

mounting brackets

Height..........................................................................  7.00 in.

(17.8 cm)

Width .......................................................................... 17.25 in. (43.8 cm)

Depth........................................................................... 11.75 in. (29.9 cm)

Weight......................................................................... 11.00 lbs (  5.0 kg)

B.  FUNCTIONAL DESCRIPTION

3.  Operational Capabilities

3.1

Each system (one Line Unit and from one to six Channel Units) can support up to either 24 or 32
subscriber channels.  Each Channel Unit can provide four (4) or eight (8) channels, depending on the
service offered.  Services offered are:

•

Plain Old Telephone Service (POTS)

•

Integrated Services Digital Network (ISDN)

A label on the FCS-718 shelf indicates numbering for the Line and Channel
Units.  When the Line Units are a List 1 or 2, black numbers indicate sequential
Channel Unit numbering 1 through 12.  When the Line Units are List 3 or higher,
blue numbers indicate Channel Unit numbering 1 through 6 for each system.

3.2

Tables 1 and 2 show how to utilize channels, dependent on the Channel Unit (4 or 8 channels) and
the type of subscriber service (i.e., POTS or ISDN) selected.

Summary of Contents for 150-1318-02



































Reviews:

No comments

Brands by name

Popular brands

Load more brands