Copper Fit STEP FX, Quick Start Manual

Page: 3 / 11

3 4
Installing/Changing the Battery
1. To install/change the battery, remove
the Copper Fit Step FX display
module from the band (see page 2).
2. Turn display module over to bottom side
then use the Philips screwdriver (included
in the package) to remove the screw in the
center of the display module (next to the
SET
and
RESET
buttons).
3. Open the hinged door and replace the
battery with a new CR1620 Lithium cell
battery (included in the package) with the
plus side (+) facing out.
SET
RESET
SET
RESET
SET
RESET
SET
RESET
SET
RESET
SET
RESET
SET
RESET
SET
RESET
When the Low Battery symbol is displayed, the battery
needs to be replaced.
WARNING:
Button cells can be extremely harmful to small
children. Properly dispose of used cells immediately upon
removal. Keep all button cell batteries away from children.
COPPER
TAB
4. Insert battery underneath copper tab.
5. Close the hinged door and turn screw
clockwise to secure.
NOTE: After battery has been installed or changed, the unit will
automatically prompt you to set the date and time (see Setting
Time and Date , page 5).