10
+ &
Pre-programmed playback mode A3 changes the overall sound characteristics to the
below frequency response. The basic characteristic of A3 is resulting in a linear frequency
response with a modest tilt. The tilt secures that the tonal balance after compensation is
natural. Many loudspeakers generate insufficient energy in the lower octaves as well as in the
important fundamental frequency range (Higher bass/lower mid-range), and at the same time
generate too much energy in the highest octaves. A3 creates a natural linear response after
compensation.
A3 is advantageous to a very wide range of audio systems and is recommended
for users with personal preferences of “musical” sound characteristic rather than
“technical” sound characteristics. A3 suits most classic designed high-fidelity
loudspeakers
.
10Hz 50Hz 100Hz 500Hz 1kHz 5kHz 10kHz 20kHz
0dB
-4dB
-8dB
-12dB
-16dB
+ 4dB
+ 8dB
+ 12dB
+ 16dB
+ 20dB
-20dB
TARGET CURVE - CINEMA-STYLE LINEAR RESPONSE
A3 is especially advantageous to smaller loudspeakers – e.g. bookshelf
loudspeakers and medium size loudspeakers on stands.
A3 is furthermore advantageous in audio systems being used in movie systems.
A3 may not be recommended for large loudspeakers capable of generating large
energy levels in the lowest octaves. A3 may not be recommended for very small
loudspeakers incapable of reproducing the lowest octaves with realistic energy
level (unless the loudspeakers limitations in regard to maximum sound pressure
level is fully respected).
. &
Pre-programmed playback mode A4 is as default set as talk-through (by-pass /
no compensation
).
Summary of Contents for DRC205
Page 1: ...1...
