2
We would like to take this opportunity to thank you for selecting the CDA823 CD-player.
We at Copland wish you many enjoyable hours in the company of fine music.
Please read this owners manual before operating the equipment.
Various regulation agencies require us to bring the following information to your attention.
Please read carefully.
To prevent fire or shock hazard, do not expose this unit to rain or moisture.
Check that your supply voltage is the same as indicated
Dangerous voltage inside. Do not open the cabinet. There are no user
serviceable parts inside. Repairs should be carried out by qualified service
personnel only.
Ensure that no objects or fluids pass through openings in the chassis.
If liquid is spilt into the CD-player, disconnect from the mains and consult a
qualified service technician.
Open the carton and remove the CD-player from its plastic bag. The AC-power cord is placed
in the bottom of the carton. Before placing the unit in your home read this carefully.
Do not subject the CD-player to high mechanical vibration.
Always make sure that power is turned off before connecting or disconnecting any input or
outputs.
When AC-power is applied for the first time or if AC-power has been
disconnected : Please wait for minimum 15 seconds before turning the CD-player on, to allow
all power supply and microcontrollers to become operational.
Use shielded cables to connect the CD-player to the amplifier.
To minimise the introduction of hum and noise the shielded cables should run parallel to each
other or loosely twisted together. Locate the cables away from speaker leads and AC power
cords.
! " #
The AC power cord is plugged into a 110/120/220/240 volt 50/60 Hz wall outlet. The right
voltage is indicated on the back panel over the power inlet.
Summary of Contents for CDA823
Page 1: ...1...
