Tools required
Insert a cross nut into each of the
headboard uprights
. The hash mark on
the front of the nut should be aligned
vertically. Insert the
¼” - 20 x 80mm hex
bolts through the underside of the
headboard deck and into the cross nuts.
Fully tighten each bolt with the Allen
wrench (
Figure 8
).
Step 7:
Install headboard assembly
Philips head screwdriver
Figure 8
.
Install headboard
assembly
3
¼” - 20 x 80mm hex bolt
Allen wrench
Cross nut
Hash mark
Headboard assembly
Headboard
uprights
Headboard
deck end
Footboard
deck end
Step 6:
Place the
Headboard
Place the
headboard assembly
on the
deck assembly by inserting each upright
tenon into the cutouts on the headboard
deck end (
Figure 7
).
Upright tenon
Figure 7
.
Place Headboard
Deck cutout
assembly
Headboard
uprights
Headboard
assembly
