I n s t r u c t i o n s f o r W a v e Q u e e n B e d s
Tools required
Please identify
the listed items
before
installation.
Components included:
Middle support legs (2)
Allen wrench (provided)
Step 1:
Unpack the
deck
Unpack the box. Lean the bed
Deck
against a wall, making sure to protect
the wood surfaces. The
Deck Corner
Blocks
should be facing you (
Figure 1
).
Hardware included:
1
Figure 2
.
Install
Middle Legs
¼ - 20 x 20mm
hex bolt
¼” - 20 x 20mm hex bolts (24)
Hairpin/wooden tapered legs (4)
Deck (1)
¼” - 20 x 80mm hex bolts (4)
Headboard assembly (1)
Allen wrench (1)
Wave bed
Queen
66” x 87 1/2” x 37 5/8”/40 5/8”
Footboard rail (1)
Cross nuts (4)
Floor
W
all
Step 2:
Install middle legs
Keep the bed
deck
upright. Align the
holes on the
middle leg
plates with the
holes on the
center rail
. Insert hex bolts
in each hole on
middle leg
plates and
tighten the middle legs by using the
provided Allen wrench (
Figure 2
).
Center Rail
Middle
Leg
#8 -
32 x 1” machine screw w/ washers (4)
Deck Corner
Block
Protect
wood
surfaces
Figure 1
.
Lean bed deck
against a wall
Notice:
Beds must be disassembled before moving to avoid damage. Never attempt to
move the bed while it is assembled. Failure to do so would void the warranty.
