4. Make sure you have set up the network settings about WE-7020S and DVR.
Software Installation
1. Open an IE browser and type in the URL:
http://dvrip/Etm.exe
, download and
execute the Etm.exe on any Windows PC within the same LAN, and this program will
auto-search all WE-7020S on LAN. After executing the Etm.exe, pop-up window as
below:
2. There are two selections under the button “
View
”: a.
Refresh
b.
Exit
a.
Refresh
: Click it to refresh the information if there are any new WE-7020S being
connected, or the IP Addresses are floated.
b.
Exit
: Click it to exit and close the Ethernet Manager Window.
3. There are two selections under the button “
Config
”: a.
IP Address
b.
Device Settings
.
a. IP Address: to set the IP Address and Subnet Mask of the WE-7020S.
