COP-USA DVR2704TS-TVI User Manual Download

Page: 52 / 66

HD-TVI DVR User Manual

Fig 7-2 Right Key Sub Menu

Stream:

This DVR supports master stream and sub stream. Master stream has higher frame

rate, max 25FPS

PAL

/30 FPS

NTSC

for every channel, but it needs higher network

bandwidth simultaneously. Sub stream has low frame rate, max 6FPS

PAL

/7FPS

NTSC

for every channel, it requires low network bandwidth. Therefore, you can select the stream
according to your bandwidth.

All to master/sub stream:

Set all channel to master stream or sub stream.

Enable audio:

Enable or disenable audio.

Full screen:

The live preview picture will display with full screen and the tool bar will be hid.

Double click left mouse or click right mouse to return.

Zoom in:

Single channel large screen electronic amplification. Click the channel which needs

to be zoomed. Right click to select zoom in button to zoom in the image. Double click or right
click to exit.

7.5 Remote Playback & Backup

7.5.1 Remote Playback

Click

button to go into record playback interface. Refer to Fig 7-3.

Select the record date and channels and double-click the file name in the record file list box.
Then you can play that file and preview the picture.

Fig 7-3 Play Record File Interface

Summary of Contents for DVR2704TS-TVI


































































Search results

Summary of Contents for DVR2704TS-TVI

Reviews:

Related manuals for DVR2704TS-TVI

Brands by name

Popular brands

COP-USA DVR2704TS-TVI, User Manual

Search results

Summary of Contents for DVR2704TS-TVI

Reviews:

Related manuals for DVR2704TS-TVI

Brands by name

Popular brands