22
ALL ABOUT IMAGE RECOGNITION & PROCESSING
15-VP16-HDD2 & 15-VP16-CDRW
3. Operation
b. ALARM SETUP
Display of ALARM SETUP
ALARM SETUP
CH 01 : NO
CH 03 : NO
CH 05 : NO
CH 07 : NO
CH 09 : NO
CH 11 : NO
CH 13 : NO
CH 15 : NO
SELECT
, EDIT ENTER/
CH 02: NO
CH 04 : NO
CH 06 : NO
CH 08 : NO
CH 10 : NO
CH 12 : NO
CH 14 : NO
CH 16 : NO
ALL : _ _
RELAY : ENABLE
NO
..NORMAL OPEN
NC
..NORMAL CLOSE
_ _..............DISABLE
SYSTEM SETUP
CAMERA SETUP
TIME/DATE SETUP
RECORD SETUP
HDD MANAGEMENT
MISCELLANEOUS SETUP
TCP/IP SETUP
FACTORY DEFAULT
BUZZER SETUP
ALARM SETUP
TIMER SETUP
PAN/TILT CMD SETUP
BAUDRATE SETUP
PASSWORD SETUP
Set type of alarm sensors connected to unit. Set at NO (Normal Open) or NC (Normal Close) for alarm
sensors. Set at DISABLE or ENABLE for relay output.
Move to item you want to change using [Up] and [Down] buttons, change type using [Left] and [Right] button.
To set altogether as a whole, locate cursor at
“
ALL ; --
“
and select type you want using [Left] and
[Right] button.
Just exit and all setting is memorized by the system.
8. MISCELLANEOUS SETUP
SYSTEM SETUP
CAMERA SETUP
TIME/DATE SETUP
RECORD SETUP
HDD MANAGEMENT
MISCELLANEOUS SETUP
TCP/IP SETUP
FACTORY DEFAULT
BUZZER SETUP
ALARM SETUP
TIMER SETUP
PAN/TILT CMD SETUP
BAUDRATE SETUP
PASSWORD SETUP
Press [Up] and [Down] buttons to move to item you want to set, and select using [Left] and [Right] button.
Press [ENTER] button to set. To set altogether at ON or OFF, move to ALL BUZZER and set at ON or OFF.
a. BUZZER SETUP
BUZZER SETUP
ALL BUZZER
KEY BEEP
LOSS EVENT
ALARM EVENT
MOTION EVENT
: _ _ _
: ON
: OFF
: ON
: OFF
Display of BUZZER SETUP
SELECT
, EDIT ENTER/
For all buzzers
Button buzzer
Video loss buzzer
Alarm activated buzzer
Motion detected buzzer
