13
3. Operation
15-VP04-HDD2 & 15-VP04-CDRW
6. MARK IMAGE (Internal backup) SETUP
5. Display Enlargement.
2) Press button, during Playback or PAUSE mode.
ZOOM
3) The display will enlarge by 200%
4) Use direction button to move the area enlarged.
5) Press to go back to Playback or FRZ mode.
ZOOM
1) Choose camera by pressing button.
1
2
3
4
4. Playback Speed Setup
1) During playback , press or and button.
SEQ
2) Display screen will appear as on the right.
3) On SEQ mode, use [LEFT]/[RIGHT] button to move forward (FF) or
4) Use [UP]/[DOWN] button to select the speed rate.
(High speed up to x60 and slow speed up to 1field/60sec is possible.)
Refer to MISCELLANEOUS SETUP : MARK IMAGE SETUP in PAGE.28 for details.
During Playback, press button and choose pictures using [LEFT]/[RIGHT] button to protect selected
PIP
2002/APR/12 AM 07:40:38
1X PLAY SPEED
CAM1
CAM2
CAM3
CAM4
We recommend you to install 7200rpm EIDE hard disk drive.
5400rpm EIDE hard disk drive is not good enough to retrieve recorded data
in high speed and slow speed playback mode.
ZOOM
Press(X2 Enlargement)
Press
Chosen
1X PLAY SPEED
2X PLAY SPEED
4X PLAY SPEED
8X PLAY SPEED
16X PLAY SPEED
32X PLAY SPEED
60X PLAY SPEED
Chosen
1X PLAY SPEED
1/2 PLAYSPEED
1/4 PLAYSPEED
1/8 PLAYSPEED
1/16 PLAYSPEED
1/32 PLAYSPEED
1/60 PLAYSPEED
Playback speed
Display of PLAYBACK SPEED SETUP
backward (REW).
pictures from being overwritten when hard disk is full
During playback at 60x speed, blue screen comes into view instantaneously
once in a while and you could not see some pictures at that moment even
though all they were recorded correctly, due to limitation in speed of reading
data on a hard drive, and it is not a critical error in operation of unit.
To see pictures you could not see, just go back for some seconds and
replay at a little lower speed than before.
