12
6. Frame
Rate:
Options: 0.1
、
0.2
、
0.5
、
1.0
、
2.0
、
3.0
、
4.0
、
5.0
、
10
、
15
This is to adjust the frame rate for recording. The higher the number,
the higher frame rate will be recorded. However, with frame rate, the
faster for the hard disk space will be consumed. One thing to
remember: the total frame rate of the entire system is limited. The
LINUX MPEG4 Security Video Server has a total frame rate
constrained to 60fps(frames per Second). Therefore, 15fps per
camera is the critical setting.
7. Sensitivity:
Options: 10
、
20
、
30
、
40
、
50
、
60
、
70
、
80
、
90
、
100
This is to set the sensitivity of the motion detection during recording.
It is recommended to adjust the setting to 100, in order to prevent
any data loss.
However, in some special conditions, the system continues to record
even when no change has occurred and results in a considerable
amount of useless data being recorded. In such case, it is
recommended to lower the sensitivity setting to avoid wasting hard
drive space.
8. Save the setting:
Click on the red disk icon on the top right corner to save the
setting.
1-6-3 setting date and time
1
Use UP and DOWN arrow to setup date and time of current, and click
“Set” to commit.
2
Reboot LINUX MPEG4 Security Video Server
。
