INSTALLATION
Auto Iris Lens
1. Remove the protective cap from the camera’s lens mount.
2. Carefully align the CS/C lens into the camera lens mount and turn
clockwise slowly until it is firmly attached.
3. Insert the cable Plug into the lens terminal socket located behind
of the camera body.
4. For IRIS connector details see the following table
Manual Iris Lens
1. Remove the protective cap from the camera’s lens mount.
2. Carefully align the CS/C lens into the camera lens mount and turn
clockwise slowly until it is firmly attached.
POWER SUPPLY
1. Before turning on the power to the camera, ensure that the lens is
fitted onto the camera to avoid damage to the exposed CCD
chipset.
2. You can use a DC12V or AC24V power supply for the camera.
CONNECTION
1. Connect the video and Audio outputs of the camera to the video /
Audio inputs of a monitor or DVR.
2. Connect power supply to the power input on the camera then turn
on the power.
3. Adjust the lens and camera’s setting to get the best image.
IRIS JACK
DC-LENS
P1 DUMP-
P2 DUMP+
P3 DRIVE+
P4 DRIVE-
