eliminated automatically, and it will exit the configuration mode automatically.
使用建议：
Recommendation for use:
大部分原装手柄无需校准，如果出现摇杆漂移，建议先进行校准。
Most of the original handle does not need to be calibrated. If the rocker drifts, it is
suggested to calibrate first.
F：一键无限循环功能（默认关闭）
F: Auto infinite loop function (off by default)
（固件版本不小于 V3.4003）
(The firmware version is not less than V3.4003)
此功能可以对选定的按键实施无限循环功能。 当按下此按键后，按键被会锁定在按下状态，
直至此按键被再次按下并松开。 此功能可以实现一键无限自动操作。
This function can perform infinite loop functions on selected buttons. When the
button is pressed, the button is locked in the held down state until the button is
pressed again and released. This function can achieve an infinite automatic
operation of one button.
1.开启按键的无限循环功能