Warning
• Read this instruction
booklet carefully
• This appliance is for
domestic use only. Use
as described in this
instruction booklet.
• It is a class
Ⅱ
electric appliance, so it
need not be earthed.
• Before using the
appliance, check that
the mains power
voltage corresponds to
the voltage shown on
the rating plate.
• Do not use the appliance to vacuum
liquids, sharp items such as broken glass,
hot ash etc.
• Keep the vacuum
cleaner away from
stoves and heat-
emitting appliance.
Heat can deform and
discolor the plastic parts of unit.
• Do not block the flow of air. Blocking
suction or allowing the dust to clog the
hose will decrease the efficiency.
• Do not run the
appliance over the
power cable.
• Always remove the plug
from the power socket
when the appliance is not in use and
before carrying out any cleaning or
maintenance operations.
• Check the hose before use and do not
use if damaged.
• If the supply cord is
damaged do not use.
• Never use spirits or
other solvents to clean
How to use
1. Ready for use
Connect the extension tube C to the hose I
and connect to the main body of the
vacuum. Fix your chosen brush to the steel
tube.
2. Operation
• Before using the appliance, unwind a
length of cable and insert the plug into
the power socket. A yellow mark on the
power cable shows the ideal cable
length. Do not extend the cable beyond
the red mark.
• Press the ON/OFF button to switch the
appliance on. Press it
once more to turn off.
• Slide the air intake
control button on the
handle to adjust the
suction. The greater air
intake the smaller suction.
• Choose a suitable suction according to
the surface to be
cleaned. Also adjust the
power switch J.
the appliance. Only use a
damp cloth and surface
wipe clean only
• Never leave the
appliance unattended
when it is switched on. Keep the
appliance out the reach of children or
the infirm.
• Do not use the appliance without a dust
bag or filters. Empty regularly for
optimum performance.
