CD Radio Boombox
F907
Instructions for Use
Please read and retain these instructions for future reference
v001: 17/04/19
2.
Wake the unit from STANDBY mode if required.
3.
Set the FUNCTION/RADIO BAND switch (15) to the CD/LINE IN position.
NOTE: When a 3.5mm audio cable is connected to the LINE-IN socket, CD playback will stop.
4.
Press PLAY on the external audio source EG:-MP3 player.
NOTE: the volume output is effected by the volume level on the source EG: MP3 player so make sure
that is set to about 70-80% not too loud to avoid distortion).
5.
Adjust the VOLUME control (2) on the unit to the required listening level.
Disc handling information
Do not touch the playback side of the disc.
Do not attach paper or tape to disc.
Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the centre
outwards with a soft cloth. Always keep the disc clean.
If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner, benzene, commercially available cleaners or antistatic spray
for vinyl. It may damage the disc.
Do not store discs in a place subject to direct sunlight or near heat source.
Do not store discs in a place subject to moisture and dust such as a bathroom or near a humidifier.
Store discs vertically in a case, stacking or placing object on discs outside or their case may cause warping.
Care and maintenance
Set to standby.
Switch the unit off at the mains and unplug it if you are leaving it unattended for long period (holidays etc).
Avoid leaving batteries fitted if you leave the radio unattended for long periods. They may leak and damage
the radio.
