P
For crushing ice or for blending with a pulse effect. Turn the speed dial (15)
to P and hold and release. This allows the motor to turn on and off in bursts.
1-2
For very light blending, liquids only
3-4
Use for liquids
5-6
Liquids and solids
8. Do not operate for more than 4 minutes at a time.
9. If you need to stir the contents or add more ingredients, always turn the I/R
switch to O first.
10. The measuring cup can be removed so that more ingredients can be added
without taking off the lid but ensure it is replaced before starting the motor
again.
11. To remove the blender jug, simply lift off, DO NOT twist as this will cause
damage to the small power tabs.
12. Replace the blender cover (21).
13. Remember that the blade inside the jug is very sharp – at no time insert your
fingers into the jug, even when cleaning.
Mincing
• Cut all foods into pieces (sinewless, boneless and meat without fat is
recommended, approximate size :2cm x2cm x6cm) that fit easily into the
hopper opening.
• Plug in and turn the I/R switch to I position. Turn the speed dial (15)
to speed 6.
• Feed foods into the hopper plate. Use only the food pusher (7M) to push foods
into the opening. Never push food in using your fingers.
• After use switch the unit off and unplug it from the power supply.
Reverse Function
• If the unit jams, press the I/R switch to O. Allow the motor to stop. Then press
the I/R switch to R. The feed screw will then rotate in the opposite direction
and hopefully free the jam.
• If this doesn't work, switch the unit off, unplug from the mains socket, take it
apart and clean it thoroughly.
Making Sausages
• First prepare/mince your filling.
• Insert the sausage disk (16) on to the feed screw, then the sausage tube (6M),
then the fixing ring (1M). Do not use the mixing blade or grinding disk.
• Hold an empty sausage skin over the end of the tube and feed the filling into
the hopper plate.
Making Noodles
• Insert a plastic noodle disk (18) on to the feed screw, then the fixing ring.
Do not use the mixing blade or grinding disk.
• Feed the noodle mixture into the hopper plate.
Note – never force the machine to open or close – always use the locking
switch (5).
- Never turn the speed dial (15) quickly back to O, always turn slowly through the
speeds. If you need to stop quickly, press the I/R button to O.
- The R on the I/R switch will cause the mixer to operate in reverse. This function
is for use with the food/meat grinder but can also be used for the food mixer to
loosen mixture from the blade. However, it should not be used for more than a
few seconds at a time as it may cause damage to the motor.
Maximum running time: 10min. After 10 minutes continuous use, all the Food
Mixer to cool for 10 minutes before re-commencing use.
TO USE THE DOUGH HOOK (9):
1. Never use speed 4,5,6 high speeds to knead dough when you use the
dough hook.
2. Start slowly on speed 1 and gradually build to speed 2 or 3.
3. When filling the mixing bowl, ensure that you do not overfill. Allow space to
mix. If necessary do in smaller batches.
4. The maximum quantity of flour should be no more than 1500g .
TO USE THE WHISK (11)
:
1. Use to whisk egg whites or cream.
2. Turn the speed dial to the required speed – any of the speeds are suitable.
Egg whites for example are best whisked at speeds 4 to 6 for up to 4 minutes,
according to the size of the eggs, until stiff.
3. When filling the mixing bowl, ensure that you do not overfill. Allow space to
mix. If necessary do in smaller batches.
4. Maximum quantity 18 eggs.
TO USE THE MIXING BLADE (14):
1. Use to mix any recipe or ingredients such as cakes, batter, sauces etc.
2. Turn the speed dial to the required speed – any of the speeds are suitable.
3. When filling the mixing bowl, ensure that you do not overfill. Allow space to
mix. If necessary do in smaller batches.
Note: The maximum operating time is 10 minutes for any of the
blades selected.
Note: The mixing bowl capacity is 5.1 litres but that measurement is
right to the top of the rim of the bowl. The quantity of food to mix
must be less than this to allow plenty of room for the blades to work.
TO USE THE BLENDER FUNCTION
1. Remove the blender cover (21) from the top housing (10).
2. Add ingredients to the jug according to the recipe.
3. The jug capacity is 1.5L maximum.
4. Place the lid on the blender jug and ensure the spout is fully covered, and the
measuring cup is fitted.
5. Place the blender jug in position on top of the food mixer, ensuring it is fully
pushed down.
6. Press the I/R switch (7) to the I position.
7. Select the desired speed from below.
