background image

WARNING

• Only use the recommended attachments and dust bags.

• 

Do NOT

use on outdoor or wet surfaces.

• 

Do NOT

handle the plug, cord or vacuum cleaner with wet hands.

• Always unplug after use and before performing any maintenance. 

• Allow any metal parts to cool fully before performing any maintenance.

• 

Do NOT

leave unattended when plugged in.

• This item is not a toy. Keep children and animals away from the work

area.

• Check the vacuum cleaner and power cord for damage before use. 

Do NOT

use if damaged.

• 

Do NOT

carry or pull the vacuum by the cord. 

Do NOT

close any

doors over the cord or pull the cord round any sharp corners or edges.
Keep cord away from hot surfaces.

• Always carry using the carry handle.

• Take care not to release the front cover latch when gripping the carry

handle during transportation.

• Take care during use not to run over the power cord with the vacuum

cleaner.

• Ensure that the switch on the vacuum is set to the off position before

removing the plug from the socket.

• 

Do NOT

disconnect the plug by pulling on the power cord. Always

hold the plug to remove from a socket.

• Always keep all air vents clear and free from dust, lint, hairs, etc. 

• When the filter becomes dirty, rinse it in warm water and allow to dry

fully before re-fitting.

• 

Do NOT

drop or insert any objects into any openings.

• 

Do NOT

use the vacuum cleaner to vacuum up matches, hot ashes, lit

cigarettes, pins, needles, blades or any other sharp or flammable
objects.

• 

Do NOT

use around flammable liquids or gases.

• 

Do NOT

use without the dust bag or filter fitted.

• Keep hair, fingers, loose clothing, etc. away from any moving parts or

openings. 

Do NOT

touch the brush roll when it is rotating.

• 

Do NOT

tread on or pull on the hose.

• 

Do NOT

pick up large objects with the vacuum cleaner and these may

cause a blockage and damage the vacuum cleaner. Remove large
objects from the work area before vacuuming.

• Take care when vacuuming on stairs.

• The appliance is not intended to be operated by means of an external

timer or separate remote-control system.

• This appliance should not be used by young children or persons with

reduced physical, sensory or mental capabilities or lack of experience
and knowledge unless they have been given supervision or instruction
concerning use of the appliance.

• Store in a cool, dry place.

MAINTENANCE/

TROUBLESHOOTING

Wipe housing clean with a soft dry
cloth.

Replacing the dust bag:

If the level of pick-up deteriorates
or when the full bag indicator
illuminates, the dust bag may be
full and need replacing.

To remove the dust bag, remove
the front cover by pressing down
on the latch, remove the bag stand
and take the full bag off the bag
stand.

Full bag
indicator

Front cover latch

Bag stand

Bag stand

Full bag

Summary of Contents for 9236

Page 1: ...e left or right When using the attachments supplied or when storing always ensure the vacuum cleaner is locked securely in the upright position Upright Vacuum 9236 Hard floor carpet switch PARTS Handle Power cord release hook Power cord Power cord lower hook On Off switch Crevice tool Hose Power cord lower hook Pedal Front cover latch Carry handle Full bag indicator Hard floor carpet switch Bumper...

Page 2: ...T drop or insert any objects into any openings Do NOT use the vacuum cleaner to vacuum up matches hot ashes lit cigarettes pins needles blades or any other sharp or flammable objects Do NOT use around flammable liquids or gases Do NOT use without the dust bag or filter fitted Keep hair fingers loose clothing etc away from any moving parts or openings Do NOT touch the brush roll when it is rotating...

Page 3: ...tting If the filter remains dirty after washing it will need to be replaced Re fit the HEPA filter stand and air inlet filter before vacuuming Replacing the belt Unplug the vacuum cleaner before changing the belt Before replacing the belt set to the hard floor setting Remove the bottom plate and belt cover Remove the belt and brush roll Ease the belt off the motor shaft and then lift the brush rol...

Page 4: ...cleaner and return to the upright position Pull out the suction tube from the connection to the vacuum cleaner by the suction ring being sure to hold the handle with one hand to stabilise the vacuum cleaner Remove the blockage carefully ensuring you do not damage the suction hose Once removed insert the suction hose back into the pipe and turn on the vacuum cleaner to check the blockage has cleare...

Reviews: