EC DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2004
We
The Enterprise Department Ltd.
Of
11 Bridge Street, Bishop’s Stortford, Hertfordshire, UK. CM23 2JU
in accordance with the following Directive(s):
2006/95/EC
The Low Voltage Directive
2006/42/EC
The Machinery Directive
hereby declare that:
Electric Chainsaw
Model number: 9226
Batch Number: 16676
is in conformity with the applicable requirements of the following documents
Ref. No.
Title
Edition date
BS EN 60745-1
Safety of Hand-Held Motor-Operated Electric Tools 2009
General requirements
BS EN 60745-2-13 Safety of Hand-Held Motor-Operated Electric Tools 2009
– Particular requirements for chainsaws
The Low Voltage Directive
2006
I hereby declare that the equipment named above has been designed to comply with
the relevant sections of the above referenced specifications. The unit complies with all
applicable Essential Requirements of the Directives.
Mr. Stuart Fowler
Imports Director
27.06.2012
CLEANING & MAINTENANCE
WARNING
- Always ensure that the tool is switched off and the
plug is removed from the mains socket before any adjustments or
maintenance are undertaken.
• Always keep the air holes clean on the electric chainsaw body.
They can become clogged with dust during use and this can
cause the motor the other fundamental parts of the electric
chainsaw to over heat. It is recommended that this is carried out
after every use.
•
Do NOT
operate the chainsaw with the air intake on the ground
as this will draw foreign particles into the motor area and
damage the windings of the motor.
• Regularly check to see if any dust or foreign matter has entered
the grills near the motor and around the on/off switch. Use a
soft brush to remove any accumulated dust. Wear safety glasses
and a dust mask whilst cleaning.
• Wipe the chainsaw housing with a soft damp cloth. A mild
detergent can be used but do not use any abrasive or alcohol-
based cleaning agents.
• Water must never come into contact with the chainsaw.
Do NOT
get wet.
• Never use caustic agents to clean plastic parts.
• Turn the guide bar periodically to use both sides and to generate
even wear.
• Clean the guide bar and oil holes periodically.
• The chainsaw should be periodically serviced to check the correct
operation of the chain, chain drive, motor and brake. This should
be done by an authorised service centre.
• Deburr the race sides periodically with a flat file.
• The bar needs to be evened with a flat file if one of the races is
higher than another and then smoothed with a file and fine
sandpaper. If races are considerably worn, check that the height
is always greater than the chain’s transmission links so that the
latter do not touch the bottom. Replace the bar if this should
occur.
STORAGE
• Replace the electric chainsaw blade cover and store in a dry
place. Do not store in damp places.
• If storing for an extended period, remove the chain and guide
bar and protect with anti-corrosion oil before storing.
DISPOSAL
Waste electric products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local Authority or retailer for recycling advice.
PACKAGING
• Dispose of packaging at your local recycling centre.
• Dispose of paper and carton separately from plastic bags at your
local recycling centre.
• Dispose of item at the end of its lifespan at your local authorised
household waste recycling centre.
8
RETURNS OR FAULTS
Please do not return
this item for any reason
without first calling the
Customer Service number
0844 482 4400
.
