Wireless Doorbell
10566
Instructions for Use
Please read and retain these instructions for future reference
v002:30/03/17
Power Details:
Input Voltage (Receiver): 110-240V a.c., 50/60Hz, 0.1A
The receiver measures H8cm xW8cm xD3cm (31/4in x31/4in x11/4in)
Input Voltage (Doorbell button transmitter): 1 x A23 12V d.c. Alkaline battery included.
The transmitter measures L7cm xW4cm xD1.5cm (23/4in x11/2in x1/2in).
Operating Frequency: 433.92MHz
±
200 KHz
Accessories:
Screws, Adhesive sticker, Instruction manual
Please read this instruction manual thoroughly before starting and ensure you are familiar with the
operation of your new Wireless Doorbell.
SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:
READ ALL INSTRUCTIONS BEFORE USE.
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE PLUG OR APPLIANCE, IN WATER OR
ANY OTHER LIQUID.
UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.
DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED PLUG OR AFTER THE APPLIANCE
MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY WAY.
THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF
STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
FOR DOMESTIC USE ONLY.
DO NOT PLACE ON OR NEAR HEAT SOURCES.
DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED
FOR.
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE
FOUND. TAKE CARE NOT TO DROP THE APPLIANCEAS HEAVY IMPACTS MAY CAUSE INTERNAL
DAMAGE.
Brief introduction:
1.
Working distance: 200-300 metres working range in open air.
2.
Flashing receiver has 4 working modes.
3.
Plug-in receiver.
