Night Rhino
G685
Instructions for Use
Please read and retain these instructions for future reference
v001: 01/06/20
2.
Insert 4 D-Cell batteries into Night Rhino as shown in illustration 3. Attach battery holder by aligning the
grooves on the side and snapping both sides’ tow tabs on the inside of the holder (illustration 4).
3.
Align grooves and arrow to insert battery holder (illustration 5).
Turn front cover clockwise as far as it
will go. Make sure unit is securely closed with arrow pointing at the lock symbol to ensure
weatherproof seal is tight.
Not fully tightening those two parts may allow water leaks.
Note:
Light sensor only allows Night Rhino to activate in darkness. We recommend testing in a dark room or
closet. When your Night Rhino will not turn off, that means it is time to replace the batteries.
Mounting your spotlight
Remove mounting base by turning thumbscrew counter-clockwise as shown in illustration 6. Pull
mounting base off stem of light.
Drive three screws into three holes to mount the mounting base (illustration 7). For best results, drill
pilot first and insert anchors.
Illustration 3
Illustration 4
Illustration 5
Illustration 6
Illustration 7
