Music Centre with FM Radio
G958
Instructions for Use
Please read and retain these instructions for future reference
v001: 10/07/20
Page No. 11
A) CD encoding
i) Recording 1 track
1.
Plug in the USB pen drive for recording (make sure it has enough empty space).
2.
Play the CD track you want to encode/record, as normal.
3.
Press the “ Record “ button (9) during playback of the desired track
4.
“
“ & “
“ will be flashing on the LCD display (2) to show encoding is in progress.
5.
After the encoding process has finished, the unit will stop playback automatically.
ii) Recording the complete CD
1.
Place a CD with the printed side facing up inside the CD tray & then close the CD door.
2.
After disc search has been completed, press the “ Record “ button (9) –
note:
please do not press “
Play/Pause/Stop ” button (18) and then "record" button, otherwise, only the played track will be
recorded.
3.
“
“ & “
“ will be flashing on the LCD display (2) to show encoding is in progress.
4.
After the encoding process has finished, the unit will stop playback automatically.
iii) Recoding by program
1.
Place a CD with the printed side facing up inside the tray & then close the co door
2.
Select the desired tracks by following “
CD/MP3 disc programming
“ procedures. Then press “
Play/Pause/Stop “ button (18) to start playback.
3.
Press the “ Record “ button (3) and the unit will display “
“ & “
“ & flashing. Encoding is
performing now.
4.
After completing of encoding, unit will stop playback automatically.
Remark:-
-
Insert only one type of memory media (USB pen drive) to the unit for encoding process from
CD/Phono/Tape respectively.
-
The recording speed is 1:1 and according to the actual playing time of the Phono or Tape
-
During copy mode, the system will copy the MP3 file only.
-
The system will create an “ audio “ folder for encoding file and “ fcopy “ for copying file.
-
The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
-
No song title will be recorded during encoding mode
-
To interrupt the recording, press the “ Record “ button again during record mode.
-
Encoding CD to MP3 file or copying MP3 file to USB will be successful only if the entire song being
encoded or copied, if terminate the encoding or copying process intermediately, there is no track being
recorded nor stored to the USB.